MINI MONO TRACK  
      SHOWER TRACKS & CURTAINS              


Tracks are MADE TO ORDER AND SIZE

ADVANTAGES of this track system are:-

• Can be cut down if too long. 
  If your sizes are not exact, 
  over-size your order.
  
  
• The ceiling support, if required,
  can be cut down if necessary.
  
  
• One curtain can be fitted
  without interference from
  a ceiling support.
  
  
• Ease of installation.

DISADVANTAGE:  

• The Mini Mono Track requires a 450mm radius for corners.
  
                                      

SIZES:  MADE TO ORDER


STRAIGHT:      600mm x 2400mm (ceiling support may be required)

CORNER:          900mm x 900mm  to  2400mm x 2400mm support 
                       required.

SUPPORT 
STANDARD:     600mm long.  Larger sizes must be specified.

It is important to remember that if you are not sure of sizing, order it longer so it can be cut down.

TRACKS are made of anodised aluminium and can also be made in powder coat white. 

CURTAINS are commercial grade terylene.

MONO TRACK, which is used for bedscreens, are made to order.
A faxed drawing with dimensions is required for quoting purposes.

STAINLESS STEEL SHOWER RODS
(GRADE 304 STAINLESS STEEL)

"MADE TO ORDER"


ADVANTAGES:

• Strength
  
  
• Tighter corners can be achieved

DISADVANTAGES:

• Must be ordered to precise size
  
  
• Ceiling support (if required) interferes with the
  curtain run and two curtains may be required.

Please Note:  This chart is for to be used as a reference only.  Actual colours may differ slightly to the swatches displayed on the website however we have matched them as close as possible. 

Please Note: Screws/fixings are not supplied with the track due to the different materials they are fastened to.

For the single point hangers, a single screw is put through the hanger from the tube inside.

To fix to the top of the aluminium track, a metal thread screw should be used.
(Suggested Screw: 22mm self drilling, 8 guage).